The ubiquitous S-100 bus of the 1970s is an example of this type of backplane system. The most popular computers of the 1980s such as the Apple II and IBM PC had published schematic diagrams and other documentation which permitted rapid reverse-engineering and third-party replacement motherboards.
By the late 1970s, many personal computer motherboards included consumer-grade embedded audio, video, storage, and networking functions without the need for any expansion cards at all; higher-end systems for 3D gaming and computer graphics typically retained only the graphics card as a separate component.
The ubiquitous S-100 bus of the 1970s is an example of this type of backplane system. The most popular computers of the 1980s such as the Apple II and IBM PC had published schematic diagrams and other documentation which permitted rapid reverse-engineering and third-party replacement motherboards.
Usually intended for building new computers compatible with the exemplars, many motherboards offered additional performance or other features and were used to upgrade the manufacturer's original equipment. During the late 1980s and early 1990s, it became economical to move an increasing number of peripheral functions onto the motherboard.
In the late 1980s, personal computer motherboards began to include single ICs (also called Super I/O chips) capable of supporting a set of low-speed peripherals: PS/2 keyboard and mouse, floppy disk drive, serial ports, and parallel ports.
Usually intended for building new computers compatible with the exemplars, many motherboards offered additional performance or other features and were used to upgrade the manufacturer's original equipment. During the late 1980s and early 1990s, it became economical to move an increasing number of peripheral functions onto the motherboard.
Business PCs, workstations, and servers were more likely to need expansion cards, either for more robust functions, or for higher speeds; those systems often had fewer embedded components. Laptop and notebook computers that were developed in the 1990s integrated the most common peripherals.
Passive cooling, or a single fan mounted on the power supply, was sufficient for many desktop computer CPU's until the late 1990s; since then, most have required CPU fans mounted on their [sinks], due to rising clock speeds and power consumption.
While most capacitors are rated for 2000 hours of operation at , their expected design life roughly doubles for every below this.
This typically requires the use of a low-power CPU, as well as a careful layout of the motherboard and other components to allow for heat sink placement. A 2003 study found that some spurious computer crashes and general reliability issues, ranging from screen image distortions to I/O read/write errors, can be attributed not to software or peripheral hardware but to aging capacitors on PC motherboards.
All text is taken from Wikipedia. Text is available under the Creative Commons Attribution-ShareAlike License .
Page generated on 2021-08-05